INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Published (Last):||9 October 2017|
|PDF File Size:||12.67 Mb|
|ePub File Size:||7.60 Mb|
|Price:||Free* [*Free Regsitration Required]|
Interline | Litnobiles
These may be subject to variation interoine on factors such as differences in colour and normal manufacturing tolerances. Do not exceed pot life limitations.
Products Marine Coatings Marine chemicals Marine lubricants. Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient integline.
Material is supplied in 2 containers as ibterline unit. Recommended Tip Range 0. As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information.
Read and follow niterline precautionary notices on the Material Safety Data Sheet and container labels. Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays.
Marine Coatings Marine chemicals Marine lubricants. Subject to re-inspection thereafter. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. A two interlinne epoxy holding primer.
All surfaces to be coated should be clean, dry and free from contamination. Test performance results were obtained in a controlled interpine environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments. Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures.
The drying times and overcoating intervals may alter due to various on-site factors such as tank configuration inteline ventilation rates.
Application by roller is recommended for small areas only. It is good working practice to periodically flush out spray equipment during the course of the working day. Always mix a complete unit in the proportions interrline.
Use in accordance with the standard Worldwide Marine Specifications. International Paint should be consulted to confirm that the tank coating is suitable for the range of cargoes to be carried.
Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet.
Consult your International Paint representative for specific recommendations. VOC values are typical and are provided for guidance purposes only.
Consult your International Paint representative for details. The history and age of the steel and the method of working can have a significant effect on the paint consumption. Thoroughly flush all equipment with International GTA Do not allow material to remain in hoses, gun or spray equipment. Multiple coats may be required to achieve specified film thickness. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
DO NOT thin more than allowed by local environmental legislation. Use International GTA only in exceptional circumstances. Based on this, products supplied in different territories may not be approved to all of the standards listed above.
Consult your local International Paint representative for specific recommendations. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with interlien mixed units.
Actual safety measures are dependant on application methods and work environment. Petersburg, Russia, phone: Interline A two pack epoxy holding primer. In the event welding or flame cutting is performed on metal inteerline with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
Application by brush is recommended for small areas only. Clean all equipment immediately after use with International GTA